TOPIC: 9' Arkansas Traveler

9' Arkansas Traveler 12 years 10 months ago #62778

Techno
Offline
Fresh Boarder
Posts: 2
Thank you received: 0

I just acquired my 1st boat. It is aluminum, 9' long with wooden trim on the gunwales. There is a very faded decal on the bow that reads Arkansas Traveler Airglide.... something illegible.

I have found very little info on the web, That search is what led me to this site, which is really good BTW.

If anyone has any info that would help me in restoring this little boat I would appreciate it. My first question has to do with the wood trim. It is very decayed. What wood & finish would be best to use? I am currently in the UP of Michigan, but plan on returning to Kansas if that makes a difference on wood choice.

Thanks!

Please Log in or Create an account to join the conversation.

Re:9' Arkansas Traveler 12 years 10 months ago #62779

Techno Offline Fresh Boarder Posts: 2 Thank you received: 0	Oh, BTW. Does anyone know od anyone who can produce decal reproductions for old boats? Thanks Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation.

Re:9' Arkansas Traveler 12 years 10 months ago #62791

MarkS Offline Moderator Posts: 5348 Karma: 118 Thank you received: 5	There's some pretty good info on AT in the Library section here, not sure if your model is covered or not: www.fiberglassics.com/library/Arkansas_traveler Check this box to be notified of replies to this topic. Note: BBcode and smileys are still usable.
	Please Log in or Create an account to join the conversation. Mark